01 / LASER METROLOGY
Laser Beam Profilers
Beam images, measurement software and test modes. Four wavelength families from UV to LWIR.
Explore the profiling platformLaser beam profilers · Optical test systems · ISO 9001:2015
Photonics instruments.Built for your application.
Laser beam profiling, optical measurement and automated inspection — from research benches to integrated production systems.
Designed & built by IZAKSoftware to turnkeyDirect engineering support
D4σ X1.247 mm
D4σ Y1.231 mm
Ellipticity0.987
Trusted by engineering teams in defense, medtech, semicap and research
The IZAK product portfolio
Start with what
you need to measure.
Nine product lines, from beam profiling to production testers. Filter by what you need to do.
9 product lines
02 / LASER INSPECTION
TriBeam Precision
Beam profile, calibrated power and energy, and pulse shape in one station.
Explore TriBeam
03 / RADIOMETRY
Multi-Channel Spectro-Radiometer
Parallel spectral and radiometric measurement, with optics and detectors matched to the application.
Explore the spectro-radiometer
04 / FIBER · HIGH POWER
Fiber Ferrule Beam Profiler
How a high-power beam is distributed inside the ferrule, UV to 2.2 µm.
Request details
05 / FIBER · INSPECTION
Fiber Ferrule Inspection
End-face imaging for concentricity, contamination and defects, with documented results.
Explore fiber ferrule inspection
06 / PRODUCTION TESTERS
LED & TEC Testers
LED colour, brightness and position, and verification of the thermoelectric coolers behind lasers and detectors.
Explore the LED tester
07 / LIGHT SOURCES
Pulsed Xenon Sources & Ageing Consoles
PXL lamp modules for optical setups, and consoles for controlled lamp burn-in.
Explore PXL Scientific
08 / ELECTRO-OPTIC DRIVERS
High Voltage Switcher
Drive Pockels cells for Q-switching and pulse picking.
Explore the switcher
09 / QUANTUM OPTICS
QuantumAlign NLO Stage
Position nonlinear-optical crystals with X–Y translation, tip and tilt.
Explore QuantumAlignProduct families can span more than one application. Configuration is matched to your requirements.
View the complete catalogFlagship / Laser Beam Profiler
One profiling platform,
from UV to LWIR.
The same IZAK software and test modes across four wavelength families. Choose the camera for your wavelength, then the integration level: a packaged instrument, an OEM module or software for a supported camera.
Connect beam images with measured parameters, test criteria and reports. Discuss automation and AI analytics as part of your configuration.
MeasureTestAnalyze
Explore the complete platform 
A system for your bench.
Match the detector, wavelength range and beam size to your measurement. Discuss optics, attenuation and test requirements with an IZAK engineer.
Choose a configuration ↗Packaged systems from $2,300
Build profiling into your product.
Compact USB 3 modules with IZAK measurement software and API support for instrument and test-station integration.
Explore OEM modules ↗CW / pulsed support is model-dependent
Bring your supported camera.
Use IZAK analysis, test workflows and reports with a compatible imaging setup. Confirm camera and interface compatibility before selecting the software.
Explore the software platform ↗Compatibility reviewed with engineering
Choose by wavelength
Four families. Find yours in ten seconds.
Each family covers a band of the spectrum. Enter your wavelength below, or open a family page for models, sensor formats and pricing.
300–1100 nmUV–VIS–NIRVisible and near-IR lasers, Nd:YAG, diodes. Global-shutter models for pulsed lasers.Exploreup to 2.05 µmSWIRTelecom, eye-safe and fiber lasers, including 1310 and 1550 nm.Explore1.5–5.7 µmMWIRThulium and holmium around 2 µm, Er:YAG at 2.94 µm, mid-IR sources.Explore7.7–12 µmLWIRCO₂ lasers at 9.3 and 10.6 µm for cutting, engraving and medical devices.Explore
Free engineering tools
Wavelength finder
Enter your laser wavelength. For beam size, divergence and sensor fit, use the Gaussian Beam Calculator or the full selection guide.
Built around your application
From the first measurement
to the production line.
Find a starting point by the problem you are solving.
Laser development & QA
Characterize beam shape, compare measurements and build a repeatable test workflow.
Laser measurement ↗Medical device testing
Connect optical inspection, laser characterization and calibration to the device and its test criteria.
Medical engineering ↗Fiber & component inspection
Turn image-based measurements and component checks into documented production results.
Inspection systems ↗Quantum & nonlinear optics
Position crystals and integrate optical control in research and photonics experiments.
Precision alignment ↗
The engineering behind the instruments
When a standard instrument
is not enough.
The same team that builds our instruments develops custom electro-optical test systems: optics, detectors, electronics, software and the jig, delivered with documentation. Work directly with the engineers, from the first conversation to acceptance.
DefineMeasurement & acceptance criteria
ConfigureOptics, interfaces & integration
VerifyTest evidence & documentation
Tzachi Sabati · Founder & CEO. Physicist, researcher in quantum sensing at the Technion; earlier physicist and product manager at Lumenis.
From the field
Automated calibration for IPL and laser medical devices.
A dedicated test jig, power measurement and software that identify the handpiece, calibrate it and verify every operating state, with pass/fail results and a digital report for each unit.
Read the project storyIZAK Knowledge
Make a better-informed
measurement decision.
Let’s define your next measurement
Tell us what you
need to measure.
Wavelength, power and beam size, or the device you need to test. An engineer replies with a configuration.
